Drain Tile Cleaning & Hydro Flushing — Lower Mainland BC

Silt, iron ochre and fine roots slowly choke a working drain tile system. Routine flushing every one to three years keeps water moving and buys years of life out of a system that is otherwise intact.

How often

Every one to two years on treed lots or where iron ochre is present, every three years on clean systems with cleanouts installed.

The process

High-pressure hydro jetting through cleanouts, flushing debris to the storm connection or sump, followed by a camera pass to confirm the line is clear.

Best timing

Late summer to early fall, before the heavy Pacific Northwest rain arrives.

Drain Tile Cleaning work on site

High-pressure jetting of a catch basin and storm line
Catch basin and line flushing
Technician feeding a drain camera into a cleanout with an inspection monitor
Camera inspection
Excavated foundation trench with new perforated perimeter drain pipe and drain rock
Perimeter drain replacement

Drain Tile Cleaning — before and after

Real examples of the problem and the finished result after the work is done.

Old clay perimeter drain tile collapsed and packed with roots and silt in a muddy trenchbefore
New perforated perimeter drain pipe in clean drain rock beside a waterproofed foundation wallafter
Failed drain tile replacedRoot-choked clay tile swapped for perforated pipe, filter fabric and clean drain rock.
Backyard lawn flooded with standing water after heavy rainbefore
The same backyard with a dry green lawn and a catch basin grate after drainage workafter
Standing water cleared from the yardCatch basins and a French drain carry rainfall away instead of pooling on the lawn.

How a working drainage system protects a home

Basement / crawlspaceRoof runoffDownspout leaderDrain rockPerimeter drainTo storm or sumpWaterproof membrane
Rain runs off the roof, into the leaders, down through drain rock to the perimeter drain, then out to the storm connection or sump — keeping water off the foundation wall.

Drain Tile Cleaning — quick answer

Silt, iron ochre and fine roots slowly choke a working drain tile system. Routine flushing every one to three years keeps water moving and buys years of life out of a system that is otherwise intact.

Key facts

  • How often: Every one to two years on treed lots or where iron ochre is present, every three years on clean systems with cleanouts installed.
  • The process: High-pressure hydro jetting through cleanouts, flushing debris to the storm connection or sump, followed by a camera pass to confirm the line is clear.
  • Best timing: Late summer to early fall, before the heavy Pacific Northwest rain arrives.
  • DRYHOMEBC covers 14 Lower Mainland and Fraser Valley cities: Vancouver, Burnaby, New Westminster, Richmond, Surrey, Delta, White Rock, Coquitlam, Port Coquitlam, Port Moody, Maple Ridge, Langley, Abbotsford and Chilliwack.
  • Quotes are free and carry no obligation.

Drain Tile Cleaning FAQs

What is drain tile cleaning?

Perimeter drain cleaning, hydro jetting and flushing services to clear silt and roots before the BC rainy season.

What should I know about how often?

Every one to two years on treed lots or where iron ochre is present, every three years on clean systems with cleanouts installed.

What should I know about the process?

High-pressure hydro jetting through cleanouts, flushing debris to the storm connection or sump, followed by a camera pass to confirm the line is clear.

What should I know about best timing?

Late summer to early fall, before the heavy Pacific Northwest rain arrives.

How much does drain tile cleaning cost in the Lower Mainland?

Cost depends on the length of the affected run, excavation depth, access and restoration. Most contractors confirm the scope with a camera inspection or site visit before pricing. Quotes through DRYHOMEBC are free.

Which cities is drain tile cleaning available in?

DRYHOMEBC covers 14 Lower Mainland and Fraser Valley cities: Vancouver, Burnaby, New Westminster, Richmond, Surrey, Delta, White Rock, Coquitlam, Port Coquitlam, Port Moody, Maple Ridge, Langley, Abbotsford and Chilliwack.

Managing a commercial or multi-family building?

Apartments, stratas, restaurants, parkades and industrial sites are scoped differently than houses. Jump straight to the property type you manage.

See all commercial & multi-family property types →

Request a Free Quote

Tell us about your drain tile cleaning job and we'll pass it to contractors serving your area.

  1. 1. Problem›
  2. 2. Timing›
  3. 3. Property›
  4. 4. Photos›
  5. 5. Contact

What problem are you experiencing?

Related drain tile services

Drain Tile Cleaning by city